Price: [price_with_discount]
(as of [price_update_date] – Details)

Product Description

AQQA is a professional shop specializing in aquarium supplies and accessories,all products from this store the actual filming of goods

Some questions and answers about wave pump:

Why dose the wavemaker pump very noisy?

Answer:Please pay attention to 3 points about this issue. First, please confirm whether the wave pump is completely immersed in the water. Secondly, please confirm whether the voltage is 110V/60Hz. If it is 50Hz, it will also cause the wave pump to be noisy. Thirdly, please disassemble the pump. Wave pump inspection, whether there is anything stuck near the propeller

Why does the wavemaker pump not work after a period of time?what should we do？

Answer:First of all, we must first rule out whether it is burnt out, if not, please disassemble the pump body, is there something stuck,If the problem cannot be eliminated, please ask for help.

METHOD OF APPLICATION:

1.Assemble the main pump body with magnetic base.

2.Mount the pump in the desired location.

3.Plug in any power outlet using 110V/60Hz direct.

4.For quiet operation make sure the pump fully submerged.

5.Using the articulating ball joint rotate the pump to your desired location.

6.The modulator on the air pump can be used to adjust the airflow volume, allowing you to control the amount of air bubbles produced.

SUItable for saltwater or freshwater

NOTE:

Please pay attention to the way of installation, the magnets cannot be attracted in parallel, because the magnetism is too large, it is easy to cause the glass to burst, and the magnet should be pulled off and slowly attracted. Please follow the instructions carefully. Please be careful hand when installing.

Voltage

110V/60Hz

110V/60Hz

110V/60Hz

110V/60Hz

110V/60Hz

Cord length

6.2ft

6.2ft

6.6+16ft

6ft

5.9ft

Flowrate

2000L/H (530GPH)

8000L/H (2100GPH)

800GPH-3200GPH

265GPH-800GPH

265GPH-920GPH

Recommended glass thickness

4MM-8MM

4MM-12MM

Suggest fish tank size

≤60cm

90cm-120cm

Encrypted thickened filter cover and makes strong waves:Durable, reinforced ABS case, with a cover which protects thefish without affecting water intake,simulates thenatural currents of rivers or oceans, providing a healthier and morenatural like habitat for your fish.The wavemaker will allow the tallplants to move fluidly, giving the aquarium a more natural look.
Strong magnetic suction cup,propeller design:new upgrade increases the suction cup,making the adsorption more stable.increase the shock absorber nail design,reduce vibration,ultra-silence.optimize the angle of the propeller, more powerful,constructed of Anti-corrosion titanium impellers, wear-resistant,Suitable for freshwater and saltwater aquariums
360°rotation adjustable and totally submersible and oil-free motor:360°easily adjust the direction of the water flow, no dead angle,Anti-reverse, effectively control overturn, protect the motor from damage.Environmental protection motor avoid pollution to the living circumstance.Small profile so it doesn’t take up much space in the tank.
Precautions for use: Because the bottom is a strong magnet,do not place the magnet directly opposite the unit, as it can strikethe glass very hard. Instead, gently slide the magnet into position. Please refer to the installation method in the figure.Your wavemaker MUST totallysubmersed into the water. Do not run the pump unless it is in water.

[ad_2]